一.download sco-unix: 【相关文章:Vmware gsx server 下R】
by wht 【扩展阅读:批处理 for应用】
从ftp://218.76.24.242 download一个openserver507的iso版本 【扩展信息:Mandrake 寻求在华合资 与国内企】 download scsi adapters drivers for sun:http://www.alfa.com.au/supports/mylex/scsi/multimaster/drvscoos5.zip并解压,将生成 unix.exe与unix.txt。插入一张空软盘,先格式化软盘,如果没有.在dos提示符下输入:format a: ,再输入:unix a: 做好一张btld安装盘.(如果没有这张软盘及安装btld则会出错: error: no root disk has been detected.cannot proceed verify that your hardware configuratior has a disk attached and configured as the primary disk.二.创建 vmware for sco-unix:
打开vmware v4.05. new virtual machine-->下一步-->typical-->下一步 -->other-->下一步-->下一步-->use bridged networking-->完成 三.增加scsi硬盘: edit virtual machine settings-->hardware .add-->下一步-->hard disk-->下一步 -->create a new virtual disk-->下一步-->下一步-->advanced-->scsi 0:0 hardsisk1 -->完成(这一步,不要也可以.只是我从网上download了一个sco-unix for vmware ,看里面有scsi,so...) 四.cdrom for iso:双击cd-rom1-->use iso image:iso文件路径.-->ok 此时硬件为:硬盘1(scsi 0:0) 硬盘2(ide 0:0) cdrom1(ide 1:0) 软驱1为使用驱动器a: 五.start this virtual machine 六.按f2更改cmos为cdrom启动 七.出现 ... 下一页